Attenuator
N-Type High Power Attenuators, DC-18 GHz, 2~500 Watts
Key Facts
- Impedence : 50 Ohms
- DC-18 GHz, upto 500W average power
- Operating Temperature: -55 ~ 125 degree C
- Average Power at 25°C ambient temperature
- S21 plots available with shipment
- Refer to detailed datasheets for peak power, VSWR performance data
SMA Type High Power Attenuators, DC-18 GHz, 2~50 Watts
Key Facts
- Impedence : 50 Ohms
- DC-18 GHz, upto 50W average power
- Operating Temperature: -55 ~ 125 degree C
- Average Power at 25°C ambient temperature
- S21 plots available with shipment
- Refer to detailed datasheets for peak power, VSWR performance data
Variable Step Attenuators, DC-18 GHz, 0 ~ 101 dB Range
Key Facts
- Impedence : 50 Ohms
- Broadband – Available in a choice of frequency ranges DC-18 GHz.
- Wide Choice of Attenuation Ranges : 0 ~ 101 dB
- Operating Temperature: -55 ~ 125 degree C
- S21 plots available with shipment. Refer to detailed datasheets for VSWR performance data
- Environmental – Conform to meet most environmental requirements of MIL-A-24215
- Excellent Repeatability
Key Facts
- Mixers use high-performance monolithic diodes for superior isolation and the lowest loss possible.
- Synthesized input and output matching networks maintain maximum response
- flatness across the performance band.
- Quarter wavelength stubs are used to provide diode ground paths and optimize Return Loss.
R F Mixer
R F Mixer
Key Facts
- Mixers use high-performance monolithic diodes for superior isolation and the lowest loss possible.
- Synthesized input and output matching networks maintain maximum response flatness across the performance band.
- Quarter wavelength stubs are used to provide diode ground paths and optimize Return Loss.
LL40 Series Pre-Connectorized Cable Sets
Key Facts
- LL40 series cable sets are designed as superior alternative to corrugated cables and RG214 cables. Usable upto 6 GHz:
- Equivalent to RFS LCF14-50 and Andrews LDF1-50
- Ideal replacement for corrugated types for advantage of FLEXIBILITY
- Lower Loss alternative to “RG214” types with the same mechanical size
Sensor cable sets
Key Facts
- Low noise, high impedance cables with conductive coated dielectric for charge mode sensors. Reduce ‘tribo-electric’ effect induced output variations
- Choice of Microdot 10-32, BNC, TNC connectors from world-class suppliers like Tyco, Rosenberger or equivalent.
- MIL-39012 conformant
- Drop-in equivalents to common Kistler, PCB, Dytran types readily available
- Imported cables, MIL-C-17 conformant
Low Loss Pre-Connectorized Cable Sets, LL 58 Series
Key Facts
- LL58 series cable sets are designed as superior alternative to RG58, RG223 types. Usable upto 6 GHz with a wide choice of connectors like SMA, N, BNC, TNC and in various styles like straight, right angle and panel mounts.
- RF Shielding is 90 dB. This is 30dB higher than 60dB (typical) for single shielded RG types.
- Low Loss: Loss is 30% less than comparable size RG cables.
- Flexibility: LL58 types are highly flexible and can be routed easily. They have the tightest bend radius available for any cable of similar size and performance.
R F Dividers
R F Dividers
Key Facts
-
- Ideal for antenna, CATV and satellite TV coaxial operations
- Can be used as a RF coax splitter for splitting signal from a RF coax source into multiple ones.
- Used as RF coax combiner for joining multiple RF coax signals into one run.
-
- Accurately split or combine your cable TV and antenna signals.
- Distribute one RF coax line for 8 TVs or receiving devices.
- Merge 8 RF coax lines into one for further distribution.
- High isolation, perfect performance index.
- The CATV Signal Splitter converts one standard RF coaxial cable .
- RF shielded die cast housing for absolute minimal insertion losses.
- Light weight and compact size.
Specifications
- All ports F-(f)connector,75Ohm
- Screening factor: 5-2400MHz≥100dB
R F Dividers
Key Facts
- Brand new and high quality.
- Low insertion loss and high isolation.
- Advanced manufacture technique and surface plating.
- Frequency: 1500MHz – 8000Mz.
- Split: 2-way.
- Power: 50W max.
- Insertion Loss:≤0.5dB max.
- Amplitude balance: ±0.2dB Max.
- Phase Balance:±3 Max. VSWR: 1 :1.3
- Temperature range: -40 to – 70.
- Connector type: SMA, 50 Ohms.
- Size: 5.1cm x 3.4cm x 1.3cm